Removing limescale build up from a shower head is actually easier than you think. If your shower head is not allowing water to pass through, it is probably time for a good cleaning.
-
vinegar
-
water
-
towel
-
old toothbrush
|
Step 1: Disassemble the shower head
You'll need to carefully take apart the shower head. If there is rust or limescale in the threads, it may be hard to unscrew. Wrap something around the shower head to grip it easier. It may be worthwhile to try using a jar gripper or opener. Be careful not to damage the surface of the shower head.
Step 2: Mix up a solution of water and vinegar
Make a solution of 25% water, 75% white vinegar in a plastic bucket or large plastic bowl.
Step 3: Soak the parts of the showerhead
Allow all of the pieces to soak in this mixture for at least a couple hours. You want the vinegar to really be able to penetrate and break down the limescale.
Step 4: Scrub!
Using an old toothbrush, scrub the limescale spots. Use a tooth pick to poke out any clogged holes that water should be passing through. You may have to scrub several times. If the toothbrush is not strong enough to scrub the spots, try an industrial cleaning brush.
Step 5: Rinse and dry the showerhead.
Rinse all parts of the shower head thoroughly in warm water. Use a towel to dry all of the parts.
Step 6: Put the shower head back together.
Reassemble the shower head and reinstall it in your bathroom. Be sure it is working properly.
 | For exceptionally stubborn limescale build up, you may have to soak the shower head in a pure vinegar solution with no water. |
