How To Create Iron On Transfers

Hi! My name is Lalji Varsani from Crystals R Us. Today, we will show you various aspects on how to apply iron on items. Hi I'll be teaching you how to make custom iron on transfers.

We'll be using this vinyl cutter to cut your design out. Once it's, once you've made a design from your computer, you'll send it to the vinyl cutter. I've selected to use this holographic flock material to make our design fun.

You can get many colors and different effects. This is a hologram effect, so you can see the clip part. Right now we can make our design on the software.

I'll be making simple word just to show you. Before cutting your design, remember to mirror the image. Now you can see the letters are back to front.

This is so that when, when the image is sent to the vinyl cutter, it will be cutting the reverse side round. Now I'll send the image to the cutter. Position where you want your design to be cut on the sheet.

The design is now cut, and simply cut it out from the paper. Then cut your design. Now that you have your design cut, you need to peel off the backing.

Carefully peel it off. Leaving just the lettering on the sticky plastic. Make sure you peel off all the excess from in between the letters.

Now your design is ready you can place this straight on to a t-shirt or a jumper or anything else and apply medium iron for 10 seconds and then you have your own customized t-shirt. Hope you enjoyed our little demonstration. If you wish to order any of our products, please visit www.

crystalsrus.com and you can e-mail us and we'll be happy to answer any questions you have. .