How To Paint Your Car On A Budget

Preparing a car on a budget. Basically, everything that we've done regarding repairing the bumper, repairing the wing, it's the same process for the rest of the vehicle. The only thing I would say, I advise you to do a small area at a time, perhaps do a bumper, a wing, perhaps a door, do the preparation on that, get that as a primer, then move on to the next bit.

What you don't want to be doing, unless you're a professional and you're familiar with doing the whole aspect of the job, if you're not careful, you're going to hard start a job, and then rust will set in where the car hasn't been protected, if it gets left for a few weeks. So you're better off to do a bumper or a side, then do a bonnet another time, just work your way around the vehicle, but every aspect we've covered in the past, prepping up the wing or the bumper, doing the damage on the door, it's exactly the same thing on all these different panels. Just follow the same process, get it all ready for your re-spray.

I hope what I've explained to you today is going to be useful, if there are any other problems, you can check out our website or give us a phone call and we'll be glad to help you out. .