How To Use A Rail Saw

Alright, I will show you how to use a rail saw. You need certain things, the rail saw itself. They plunge in, and you can set how far you want them to cut.

They also angle over, like that, so you can cut angle cuts. The real advantage is that they run along a rail, and the rail, you just lay it down where you want the cut to go, and then the saw follows it, it's quite simple. Because the saw blade is going to stick through the bottom, it's good to put a few bits of wood underneath, and then, you won't cut into the bench which you can see I've done before.

That's the rail. Next thing you need is extraction, if you don't use it, you've got to use masks and it's just much easier to use extraction if you've got it, ear defenders because they're quite noisy. You set the depth, first of all, which is the depth you want to cut, plus the depth of the rail itself, it's really quite simple.

Make sure the cable and the hose don't get caught. There you go, it's cut through. .