How To Use Carpet Cleaner Spray

In this video, I'm going to show you how to use a carpet spray. Before you start, you need to vacuum your carpet to make sure all dust and debris are removed. Before you start, read the instructions first.

Make sure that your stain can be cleaned with this carpet cleaner. You also need to do a patch test first, on somewhere that's not seen. This could also be useful for like your carpet won't change color, or it might ruin your carpet.

So, always use a test patch first. Before you start, you must shake the can quite vigorously. Keep shaking.

Then remove your lid. And you must do at least arm's length away, because you don't want to breathe the fumes, as this is quite flammable. And then just spray like that, on there.

You need to leave it for at least five to ten minutes. And if the stain is really bad, then you can leave it for longer. But always read the instructions on the can.

You can use a damp sponge. Not too wet, you don't want the carpet soaking and then just dab. You can see it working, and then outwards and inwards with the same.

Gently put pressure onto the mark, like that, inward and out, until the stain disappears. Then, using a paper towel to dry off, gently, on the stain like that, and using a hot tip of your spoon, you can add pressure onto the paper towel. Keep going into circles.

Outwards, inwards, like that. And then, you can see, all the moisture on the carpet is now on your paper towel, and all the marks are on there too. And that is how to use a carpet cleaner spray. .